Browsing by Subject "particle transport"

Sort by: Order: Results:

Now showing items 1-2 of 2
  • JET Contributors; Eriksson, F.; Fransson, E.; Oberparleiter, M.; Nordman, H.; Strand, P.; Salmi, A.; Tala, T.; Ahlgren, T. (2019)
    Transport modelling of Joint European Torus (JET) dimensionless collisionality scaling experiments in various operational scenarios is presented. Interpretative simulations at a fixed radial position are combined with predictive JETTO simulations of temperatures and densities, using the TGLF transport model. The model includes electromagnetic effects and collisions as well as (E)over-right-arrow x (b)over-right-arrow shear in Miller geometry. Focus is on particle transport and the role of the neutral beam injection (NBI) particle source for the density peaking. The experimental 3-point collisionality scans include L-mode, and H-mode (D and H and higher beta D plasma) plasmas in a total of 12 discharges. Experimental results presented in (Tala et al 2017 44th EPS Conf.) indicate that for the H-mode scans, the NBI particle source plays an important role for the density peaking, whereas for the L-mode scan, the influence of the particle source is small. In general, both the interpretative and predictive transport simulations support the experimental conclusions on the role of the NBI particle source for the 12 JET discharges.
  • Kirjasuo, Anu (Helsingin yliopisto, 2021)
    Despite a vast body of knowledge that has already been accumulated on particle transport at both theoretical and experimental level, a simple method for estimating particle source impact on plasma density profile peaking has been lacking. Fable et al. presented a parameter for calculating the source strength (Sstr, the S parameter) in [1]. The parameter is derived from particle flux continuity equation, and after approximations takes as input parameters only the information on neutral beam injection (NBI) power, beam ions injection energy, effective core heat transport diffusivity and plasma density, radius, and volume together with a fitted coefficient from an ASDEX Upgrade experiment. The formula was applied to a database of 165 pulses in both high and low confinement mode, mostly with neutral beam heating, in JET, Joint European Torus, fusion experiment. The results appear reasonable considering the fitted parameter and the approximations in the formula. In addition to the S parameter values, also normalised density gradient dependence on neutral beam heating power and collisionality were investigated, to compare the results with those obtained at ASDEX Upgrade in [1]. Detailed studies of six gas puff modulation shots [2, 3, 4] at JET are used as reference. In [2] the source contribution for the H-mode shots was 50-60% and low confinement mode shots 10-20%. This is further validated in [3] and the high confinement mode shots are compared to similar shots DIII-D fusion experiment in [4], where the source impact on density peaking was negligible. Observed differences are attributed to different dominant turbulent environments. The average calculated level of S parameter values suggest mostly non-negligible source contribution to density peaking, and the values differ for high and low confinement mode plasmas, in line with [2, 3, 4]. However, the results imply that the coefficient 2000 is not constant across the database, and while a scalar correction to fit the coefficient to JET may be possible for low confinement mode plasmas, the high confinement mode plasmas require further research.