Shock-darkening in ordinary chondrites : Determination of the pressure-temperature conditions by shock physics mesoscale modeling

Näytä kaikki kuvailutiedot



Pysyväisosoite

http://hdl.handle.net/10138/228800

Lähdeviite

Moreau , J , Kohout , T & Wüennemann , K 2017 , ' Shock-darkening in ordinary chondrites : Determination of the pressure-temperature conditions by shock physics mesoscale modeling ' , Meteoritics and Planetary Science , vol. 52 , no. 11 , 14388084 , pp. 2375-2390 . https://doi.org/10.1111/maps.12935

Julkaisun nimi: Shock-darkening in ordinary chondrites : Determination of the pressure-temperature conditions by shock physics mesoscale modeling
Tekijä: Moreau, J.; Kohout, T.; Wüennemann, K.
Muu tekijä: University of Helsinki, Department of Physics
University of Helsinki, Department of Physics
Päiväys: 2017-11
Kieli: eng
Sivumäärä: 16
Kuuluu julkaisusarjaan: Meteoritics and Planetary Science
ISSN: 1086-9379
URI: http://hdl.handle.net/10138/228800
Tiivistelmä: We determined the shock-darkening pressure range in ordinary chondrites using the iSALE shock physics code. We simulated planar shock waves on a mesoscale in a sample layer at different nominal pressures. Iron and troilite grains were resolved in a porous olivine matrix in the sample layer. We used equations of state (Tillotson EoS and ANEOS) and basic strength and thermal properties to describe the material phases. We used Lagrangian tracers to record the peak shock pressures in each material unit. The post-shock temperatures (and the fractions of the tracers experiencing temperatures above the melting point) for each material were estimated after the passage of the shock wave and after the reflections of the shock at grain boundaries in the heterogeneous materials. The results showed that shock-darkening, associated with troilite melt and the onset of olivine melt, happened between 40 and 50GPa with 52GPa being the pressure at which all tracers in the troilite material reach the melting point. We demonstrate the difficulties of shock heating in iron and also the importance of porosity. Material impedances, grain shapes, and the porosity models available in the iSALE code are discussed. We also discuss possible not-shock-related triggers for iron melt.
Avainsanat: IMPACT
CHONDRITES
SHOCK
IMPACT MODELS
115 Astronomy, Space science
114 Physical sciences
1171 Geosciences
Tekijänoikeustiedot:


Tiedostot

Latausmäärä yhteensä: Ladataan...

Tiedosto(t) Koko Formaatti Näytä
Shock_darkening.pdf 5.460MB PDF Avaa tiedosto

Viite kuuluu kokoelmiin:

Näytä kaikki kuvailutiedot