A modification of the electromigration device and modelling methods for diffusion and sorption studies of radionuclides in intact crystalline rocks

Näytä kaikki kuvailutiedot



Pysyväisosoite

http://hdl.handle.net/10138/315009

Lähdeviite

Li , X , Meng , S , Puhakka , E , Ikonen , J , Liu , L & Siitari-Kauppi , M 2020 , ' A modification of the electromigration device and modelling methods for diffusion and sorption studies of radionuclides in intact crystalline rocks ' , Journal of Contaminant Hydrology , vol. 231 , 103585 . https://doi.org/10.1016/j.jconhyd.2019.103585

Julkaisun nimi: A modification of the electromigration device and modelling methods for diffusion and sorption studies of radionuclides in intact crystalline rocks
Tekijä: Li, Xiaodong; Meng, Shuo; Puhakka, Eini; Ikonen, Jussi; Liu, Longcheng; Siitari-Kauppi, Marja
Tekijän organisaatio: Department of Chemistry
Geological disposal of spent nuclear fuel
Päiväys: 2020-05
Kieli: eng
Sivumäärä: 11
Kuuluu julkaisusarjaan: Journal of Contaminant Hydrology
ISSN: 0169-7722
DOI-tunniste: https://doi.org/10.1016/j.jconhyd.2019.103585
URI: http://hdl.handle.net/10138/315009
Tiivistelmä: To determine the diffusion and sorption properties of radionuclides in intact crystalline rocks, a new electromigration device was built and tested by running with I- and Se(IV) ions. By introducing a potentiostat to impose a constant voltage over the studied rock sample, the electromigration device can give more stable and accurate experimental results than those from the traditional electromigration devices. In addition, the variation in the pH of the background electrolytes was minimised by adding a small amount of NaHCO3 as buffers. To interpret the experimental results with more confidence, an advection-dispersion model was also developed in this study, which accounts for the most important mechanisms governing ionic transport in the electromigration experiments. Data analysis of the breakthrough curves by the advection-dispersion model, instead of the traditional ideal plug-flow model, suggest that the effective diffusivities of I- and Se(IV) are (1.15 +/- 0.06) x 10(-13) m(2)/s and (3.50 +/- 0.86) x 10(-14) m(2)/s, respectively. The results also show that I- is more mobile than Se(IV) ions when migrating through the same intact rock sample and that their sorption properties are almost identical.
Avainsanat: Electromigration
Advection-dispersion model
Se(IV)
Iodide
Intact crystalline rock
SOLUTE TRANSPORT
IN-SITU
SELENIUM
MATRIX
SPECIATION
SAMPLES
WATER
CLAY
116 Chemical sciences
Vertaisarvioitu: Kyllä
Tekijänoikeustiedot: cc_by
Pääsyrajoitteet: openAccess
Rinnakkaistallennettu versio: publishedVersion


Tiedostot

Latausmäärä yhteensä: Ladataan...

Tiedosto(t) Koko Formaatti Näytä
1_s2.0_S0169772219301615_main.pdf 1.313MB PDF Avaa tiedosto

Viite kuuluu kokoelmiin:

Näytä kaikki kuvailutiedot