CAD Standardization in Construction – a Process View

Visa fullständig post

Filer under denna titel

Filer Storlek Format Granska/Öppna
AUCOES, Bj?rk & Laakso, 2010.pdf 1.265Mb PDF Granska/Öppna
Använd denna länk för att citera eller länka till detta dokument: http://hdl.handle.net/10227/550
Titel: CAD Standardization in Construction – a Process View
Author: Björk, Bo-Christer; Laakso, Mikael
Citation: Automation in Construction, Vol. 19, Iss. 4, pp. 398-406
Abstrakt: There has been a demand for uniform CAD standards in the construction industry ever since the large-scale introduction of computer aided design systems in the late 1980s. While some standards have been widely adopted without much formal effort, other standards have failed to gain support even though considerable resources have been allocated for the purpose. Establishing a standard concerning building information modeling has been one particularly active area of industry development and scientific interest within recent years. In this paper, four different standards are discussed as cases: the IGES and DXF/DWG standards for representing the graphics in 2D drawings, the ISO 13567 standard for the structuring of building information on layers, and the IFC standard for building product models. Based on a literature study combined with two qualitative interview studies with domain experts, a process model is proposed to describe and interpret the contrasting histories of past CAD standardisation processes.
Permanenta länken (URI): http://hdl.handle.net/10227/550
Datum: 2010
Detta dokument registreras i samling:

Visa fullständig post

Sök i Helda


Avancerad Sökning

Bläddra

Aktivitet